| No. | Brand | E | r | m | h | a | D | P | F |
| CB-2028-28 | ISOSTATIC | - | - | - | - | - | - | - | - |
| AA-912-1 | ISOSTATIC | 77.5 mm | - | - | - | - | - | - | - |
| B-1016-4 | ISOSTATIC | - | - | - | - | - | - | - | - |
| AA-1319-2 | ISOSTATIC | - | - | - | - | - | - | - | - |
| CB-2428-10 | ISOSTATIC | - | - | - | - | - | - | - | - |
| AM-3545-45 | ISOSTATIC | - | - | - | - | - | - | 230 mm | - |
| ST-6496-8 | ISOSTATIC | - | - | - | - | - | - | - | - |
| AA-838-15 | ISOSTATIC | - | - | - | - | - | 110 mm | - | - |
| CB-2027-28 | ISOSTATIC | - | - | - | - | - | - | - | - |
| AA-1803-15 | ISOSTATIC | - | - | - | - | - | - | - | - |
| AA-346 | ISOSTATIC | - | - | - | - | - | 35 mm | - | - |
| SS-4252-40 | ISOSTATIC | - | - | 160 mm | 60 mm | 180 mm | 85 mm | - | - |
| AM-3645-22 | ISOSTATIC | - | - | - | - | - | - | - | - |
| CB-0912-16 | ISOSTATIC | - | - | - | - | - | - | - | - |
| AA-225-2 | ISOSTATIC | 10 mm | - | - | - | - | - | - | - |
| CB-2129-24 | ISOSTATIC | - | - | - | - | - | - | - | - |
| EP-162140 | ISOSTATIC | - | - | - | - | - | 5 mm | - | - |
| AA-838-16 | ISOSTATIC | - | - | - | - | - | - | - | - |
| SS-2430-32 | ISOSTATIC | - | - | - | - | - | - | - | - |
| EW-203201 | ISOSTATIC | - | - | - | - | - | - | - | - |
| EP-324016 | ISOSTATIC | - | - | - | - | - | - | - | - |
| FM-609-12 | ISOSTATIC | - | - | - | - | - | - | - | - |
| SS-1824-8 | ISOSTATIC | - | 2 | - | - | - | 130 mm | - | - |
| SS-3240-32 | ISOSTATIC | - | - | - | - | - | - | - | - |
| SS-3648-28 | ISOSTATIC | - | - | - | - | - | - | - | - |
| ISOSTATIC AA-1051-3 Sleeve Bearings | Z_:28; Y1:2.2; ALPHA_:0.198; ALP3:0; d:630; Macha rpm:0; ALP1:11; D_:920; X2:0.67; TSR rpm:280; |
| ISOSTATIC SS-1824-8 Sleeve Bearings | C0:49.5 kN; Weight:2.3 kg; C:30 mm; B:77.8 mm; T max.:100 °C; S:33.3 mm; Recommended tightening torque for set screw:27.1 Nm; r:2; SW:5.56 mm; D:130 mm; |
| ISOSTATIC B-1016-4 Sleeve Bearings | rs min:3 mm; D1:253.7 mm; Associated sleeve reference:H2332; Brand:SNR; d:160 mm; Mass:28.71 kg; Characteristic inner ring frequency, BPFI:10.39 Hz; da min:174 mm; ra max:2.5 mm; Radial clearance class:CN; |
| ISOSTATIC AA-346 Sleeve Bearings | D1:30.5 mm; Characteristic inner ring frequency, BPFI:4.93 Hz; Dynamic load, C:7.6 kN; Max operating temperature, Tmax:120 °C; d:15 mm; D:35 mm; da max:19.7 mm; Fatigue limit load, Cu:0.22 kN; rs min:0.6 mm; da min:19 mm; |
| ISOSTATIC AM-2026-16 Sleeve Bearings | T max.:200 °C; A:10.5 mm; Weight:1.68 kg; B:43.5 mm; s1:21.75 mm; A2:32.6 mm; d:49.21 mm; C:35.1 kN; H:155.6 mm; T min.:-20 °C; |
| ISOSTATIC CB-2529-28 Sleeve Bearings | Brand:NTN; Radial clearance class:C3; Da max:247 mm; Characteristic cage frequency, FTF:0.39 Hz; Nlim (grease):1,600 rpm; B:55 mm; Fatigue limit load, Cu:6.1 kN; Characteristic outer ring frequency, BPF0:3.13 Hz; f0:13.5; Mass:12.4 kg; |
| ISOSTATIC EP-091216 Sleeve Bearings | L:115 mm; T max.:100 °C; S:7.5 mm; A4:21 mm; Recommended tightening torque for set screw:3.7 Nm; H3:70; Designation of housing:FC205N-; T min.:-20 °C; G:M6x1; s1:13.5 mm; |
| ISOSTATIC FM-2026-25 Sleeve Bearings | A:48 mm; L:167 mm; T min.:-20 °C; Recommended tightening torque for set screw:8 Nm; S:17.5 mm; d:36.51 mm; H1:19 mm; G:M6x1; Z:22.6 mm; Weight:1.65 kg; |
| ISOSTATIC CB-2228-16 Sleeve Bearings | d:55 mm; C0:29.2 kN; Weight:2.87 kg; Z:39.2 mm; Designation of housing:FL211N-; B:45.3 mm; e:25 mm; A1:18 mm; S:11.8 mm; A:43 mm; |
| ISOSTATIC B-1519-6 Sleeve Bearings | J:157 mm; A1:18 mm; Designation of bearing:EX210-30G2; B1:62.7 mm; Weight:2.5 kg; C0:23.2 kN; L:115 mm; s1:42.9 mm; C:35.1 kN; A2:60.1 mm; |
| ISOSTATIC CB-1422-24 Sleeve Bearings | A1:23 mm; d:23.81 mm; Designation of housing:PA205-; L:84 mm; T min.:-20 °C; H:36.5 mm; H1:12 mm; H2:72 mm; S:14.3 mm; G:M6x1; |
| ISOSTATIC AA-1608-11 Sleeve Bearings | L1:260 mm; T min.:-20 °C; Z:23.5 mm; L:320 mm; Designation of bearing:UC208-24G2L4; S:19 mm; H:120 mm; B:49.2 mm; SW:3.97 mm; G:R1/8"; |
| ISOSTATIC CB-1016-20 Sleeve Bearings | Nlim (grease):34,000 rpm; Da max:17 mm; f0:12.1; d:6 mm; da min:8 mm; Category:Bearings; Fatigue limit load, Cu:0.04 kN; Min operating temperature, Tmin:-20 °C; Dynamic load, C:2.34 kN; B:6 mm; |
| ISOSTATIC CB-5668-78 Sleeve Bearings | Weight:1.12 kg; N:11,5mm; B:38.1 mm; e:20 mm; Recommended tightening torque for set screw:5.5 Nm; S:15.9 mm; A1:12 mm; A2:42.2 mm; J:82.5 mm; T min.:-20 °C; |
| ISOSTATIC AA-838-16 Sleeve Bearings | A1:18 mm; T max.:100 °C; A:48 mm; e:29 mm; T min.:-20 °C; d1:82 mm; S:30.9 mm; A2:75.8 mm; B1:77.7 mm; Recommended tightening torque for set screw:16.8 Nm; |
| ISOSTATIC AA-1332-10 Sleeve Bearings | s1:53.2 mm; A1:20 mm; B1:77.7 mm; Designation of housing:FA212-; L1:118 mm; N:23mm; B:61.8 mm; Designation of bearing:EX212-39G2T20; C:52.5 kN; L:140 mm; |
ISOSTATIC SS-4056-48 Sleeve Bearings Video
4783-Bearing Sales Catalog:Catalog pages - Brenner ...
ISOSTATIC INDUSTRIES INC., CHICAGO, IL 800-621-5500 ... 1/8 401003 SS-48-2. 1/4 401004 SS-48-4. 3/8 401005 SS-48-6. 1/2 401006 SS-48-8 ... 401426 SS-4056-48.58 pages
Isostatic - 401426 - Oilube Powdered Metal Sleeve Bearing , Bronze ...
Technical Specs · NOMINAL LENGTH INCHES 3 · CATALOG NUMBER SS-4056-48 · LOAD - P MAX VALUE 2, 000 lb/in² · DESCRIPTION Sleeve Bearing - INCH · LOAD @ SPEED - PV MAX ...
4783-Bearing Sales Catalog:Catalog pages
1/8 401003 SS-48-2. 1/4 401004 SS-48-4. 3/8 401005 SS-48-6 ... ISOSTATIC INDUSTRIES INC., CHICAGO, IL 800-621-5500 ... 1.254 1.754 1-1/2 401422 SS-4056-24.
Isostatic Industries SS-4056-48 P/M SLEEVE 1.254 X 1.754 X 3
Maximum Velocity: 1200 sfpm; Bearing Material: SAE 841 Powdered Metal/Oil Impregnated Bronze; Temperature Rating: 10 to 175 deg F; Maximum Pressure: 2000 psi ...Material: Powdered Metal / Oil Impregnated Br...Weight: 0.8 lbTypically ships in: 1 day
ISOSTATIC SS-4056-48 Sleeve Bearings - ntn bearing corp.of america
ISOSTATIC SS-4056-48 Sleeve Bearings Product Brochures , PT INTERNATIONAL Brand NTN BEARING CORP.OF AMERICA Sleeve Bearings Manufacturing Service .
Isostatic-Catalog-rev-02-15.pdf
1/8 401003 SS-48-2. 1/4 401004 SS-48-4. 3/8 401005 SS-48-6. 1/2 401006 SS-48-8 ... 401424 SS-4056-32. 2-1/2 401425 SS-4056-40. 3. 401426 SS-4056-48.59 pages
SS-4056-48 - Isostatic - Allied Electronics & Automation
Isostatic SS-4056-48. Mfr. Part #: SS-4056-48. Allied Stock #: 72392497. Description. Sleeve Bearing, SS-4056-48 1.254 X 1.754 X 3in, Powdered Metal Bronze.
SS-4056-48 ISOSTATIC (401426) - I73GN45430
Bushings ; Type. Sleeve Bearing ; Material STD. SAE 841 ; Inch / Metric. Inch ; Nominal ID. 01.250 - 1 1/4 ; Nominal OD. 1 3/4.
ISOSTATIC SS-4056-48 Sleeve Bearings | SS-4056-48 Bearing
ISOSTATIC SS-4056-48 Sleeve Bearings ; N: 23mm ; J: 202 mm ; A2: 68.7 mm ; Weight: 3.97 kg ; C0: 32.8 kN.
SS-4056-48 - ISOSTATIC | Sleeve Bearings | BDI USA
1-1/4" Nominal Bore; 1-3/4" Nominal Outside Diameter; 3" Length Thru Bore; Bushing No Flange Profile; Oil Impregnated Sintered Bronze; SAE841 Material; 1-1/44" ...