| 45BER10STSULP3 NSK Super Precision Bearings | End plug (suffix Y):X-5217-4; R2:42.862 mm; J max.:635 mm; N1:34.925 mm; Da:359.999 mm; Cap bolt recommended tightening torque:2467.6 N·m; da:227.012 mm; H1:209.55 mm; J min.:571.5 mm; Initial grease fill:2154.6 g; Cap bolt:1 1/4-7 UNC; P150°:185 kN; H2:85.725 mm; R1:122.237 mm; J1:127 mm; A2:295.275 mm; PG:1/4 NPT; P60°:557 kN; P120°:207 kN; h:56.356 mm; |
| 7913A5TRDUDLP3 NSK Super Precision Bearings | B:51 mm; Dynamic (Cr):3 mm; rs (min):2.1 mm; d:70 mm; Oil:38.850 kN; with tapered bore:3 000 min-1; Static (Cor):5.5 mm; D:150 mm; Pu:289 kN; Grease:330 kN; with cylindrical bore:2 400 min-1; |
| 7212A5TRSUMP3 NSK Super Precision Bearings | das:267 mm; r3,4 min.:3 mm; Limiting speed:1000 r/min; d:240 mm; r1,2 min.:3 mm; B:160 mm; D:360 mm; D1 ≈:323.5 mm; s max.:9 mm; Basic static load rating C0:3900 kN; Reference speed:800 r/min; ra max.:2.5 mm; Basic dynamic load rating C:2120 kN; Da max.:347 mm; rb max.:2.5 mm; Calculation factor kr:0.5; d1 ≈:276.7 mm; Mass bearing:56 kg; b1:9.4 mm; Fatigue load limit Pu:400 kN; |
| 7210A5TRSUMP3 NSK Super Precision Bearings | M2:39 mm; Hexagonal head bolt:M 16x30; Spring washer in accordance with DIN 128:A 16; B:50 mm; M1:7 mm; M3:18 mm; Mass locking clip:0.21 kg; M:21 mm; |
| 7011CTRDUDLP3 NSK Super Precision Bearings | db:158.75 mm; L:628.65 mm; R1:115.888 mm; Stabilizing ring:SR-34-0; H:360.363 mm; A2:247.65 mm; PG:1/4 NPT; P60°:345 kN; PosiTrac Plus contact element (db shaft position):B10724-161; End plug (suffix Y):EPR 19; H1:179.4 mm; Pa:73.4 kN; Labyrinth ring (db shaft position):LOR 161; H2:69.85 mm; da:170 mm; A1:171.45 mm; Cap bolt recommended tightening torque:1220 N·m; Initial grease fill:878.85 g; |
| 60BNR19STV1VSUELP3 NSK Super Precision Bearings | db min.:85 mm; ra max.:2 mm; Da max.:127.8 mm; B:33 mm; Fatigue load limit Pu:21.6 kN; Mass bearing:1.74 kg; D:140 mm; Calculation factor kr:0.15; Basic dynamic load rating C:183 kN; F:82.5 mm; Reference speed:4800 r/min; rb max.:2 mm; d:65 mm; Basic static load rating C0:196 kN; da min.:77 mm; s max.:2.2 mm; D1 ≈:119 mm; da max.:80 mm; r3,4 min.:2.1 mm; r1,2 min.:2.1 mm; |
| 7210CTRSUMP3 NSK Super Precision Bearings | Calculation factor fHC:1.01; r3,4 min.:0.3 mm; db max.:29.4 mm; Preload class B GB:130 N; Fatigue load limit Pu:0.173 kN; Calculation factor f2B:1.03; D2:41.5 mm; d:25 mm; D:47 mm; Da max.:43.8 mm; Calculation factor f1:1; Attainable speed for grease lubrication:56000 r/min; Number of balls z:14; Static axial stiffness, preload class C:56 N/µm; Calculation factor f:1.05; Preload class A GA:45 N; |
| 45BER19STSULP3 NSK Super Precision Bearings | B:160 mm; Coefficient of friction µ min.:0.08; Mass bushing:8.4 kg; Coefficient of friction µ max.:0.15; a:8 mm; Permissible sliding velocity v max.:0.5 m/s; d:180 mm; Tolerance housing:H7; Tolerance shaft:e7; Specific dynamic load factor K:25 N/mm²; Specific static load factor K0:45 N/mm²; Permissible sliding velocity v min.:0 m/s; h:182 mm; D:200 mm; α:124 °; |