| 7912CTRDUMP3 NSK Super Precision Bearings | Cap bolt recommended tightening torque:1735.4 N·m; Pa:59.6 kN; H1:200.025 mm; h:57.15 mm; A2:339.725 mm; Cap bolt:1 1/8-7 UNC; Appropriate attachment bolt size G:1.25 in; PG:1/4 NPT; Max. speed for Taconite seal:385 r/min; Ca:101.803 mm; Stabilizing ring:2 x 36053-140; P120°:151 kN; R1:120.65 mm; P90°:249 kN; RG:1 NPT; L:711.2 mm; H:400.05 mm; Housing:SAFS 044 KA; R2:42.069 mm; A1:190.5 mm; |
| 7213CTRDUDMP3 NSK Super Precision Bearings | B:50.00 mm; Grease Speed Rating Open/Shielded n1:2200 rpm; D:240.0000 mm; Accessories:One Shield; Basic Dynamic Radial Load Rating C:216000 N; Fillet Radius ra:2.50 mm; Oil Speed Rating Open/Shielded n2:2700 rpm; d:110.000 mm; Basic Static Radial Load Rating Co:250000 N; |
| 7212CTRDUDLP3 NSK Super Precision Bearings | P90°:32.5 kN; Ca:37.008 mm; Mass pillow block:12.7 kg; Cap bolt:2 x 1/2-13 UNC; A1:79.375 mm; Housing:FSAF 515; Pa:6.67 kN; J1:47.625 mm; S:3.175 mm; P150°:18.2 kN; Da:130 mm; N1:15.875 mm; Cap bolt, SAE grade:5; Max. speed for Taconite seal:1250 r/min; J min.:219.075 mm; L:285.75 mm; P60°:54.3 kN; da:63.5 mm; Stabilizing ring:SR-15-0; Appropriate attachment bolt size G:0.5 in; |
| 7012A5TRDULP3 NSK Super Precision Bearings | D:12.7000 mm; d:4.800 mm; Basic Dynamic Radial Load Rating C:956 N; Basic Static Radial Load Rating Co:490 N; Width Plain B:4.0 mm; Grease Speed Rating Open/Shielded n1:57000 rpm; Accessories:Without Accessories; Fillet Radius ra:0.30 mm; Shielded or Sealed B1:5.0 mm; Sealed Speed Rating n3:40000 rpm; Oil Speed Rating Open/Shielded n2:69000 rpm; |
| 7913CTRSUMP3 NSK Super Precision Bearings | P180°:400 kN; Q150°:360 kN; J6:378 mm; J:350 mm; L:410 mm; Q180°:310 kN; End cover:ASNH 524-620 R; H1:140 mm; Bearing (basic designation):23224 K; P55°:790 kN; Mass housing:26.2 kg; Appropriate attachment bolt, size G:24 mm; N1:26 mm; Oil level, min.:46 mm; P120°:350 kN; A1:120 mm; Pa:260 kN; Eye bolt, size:2 x M 10; Oil level, max.:55 mm; H:271 mm; |
| 110BAR10STYNDBLP4A NSK Super Precision Bearings | Hydraulic nut:HMVC 52E; d:260 mm; Sleeve:S 3052x9.7/16; d1:239.713 mm; Mass adapter sleeve assembly:18.5 kg; B5:44.704 mm; B1:152.629 mm; d3 max.:309.702 mm; Threads per inch:6; G:258.877 mm; B:35.966 mm; |
| 7212CTYNSULP4 NSK Super Precision Bearings | dynamic Cr:122.080 kN; static Cor:205.000 kN; D1:42 mm; Oil:2 700 min-1; d1:90 mm; D:90 mm; Grease:2 000 min-1; rs (min):1.1 mm; Pu:9.320 kN; H:36 mm; d:40 mm; |
| 50BER10STSULP3 NSK Super Precision Bearings | Calculation factor f2B:1.04; Mass bearing:0.7 kg; dn:125.4 mm; da min.:116 mm; Da max.:144 mm; Calculation factor f2A:1; Preload class B GB:1030 N; d1:122.4 mm; Static axial stiffness, preload class A:221 N/µm; rb max.:0.6 mm; Static axial stiffness, preload class C:441 N/µm; Calculation factor (single, tandem) Y2:0.87; C1:10.9 mm; D1:137.51 mm; r1,2 min.:1.1 mm; b:2.3 mm; Fatigue load limit Pu:1.18 kN; |